Set of 2 Motion Sensor Wall Lights, 12W, 6000mAh, 3 Colours, Black

Description

Product Description:
This set provides two black motion sensor wall lights, each rated at 12W power consumption (light output equivalent to a higher wattage incandescent bulb) and containing a 6000mAh rechargeable battery. The motion detection feature automatically activates the lights when movement is sensed, which is useful for areas such as stairwells, entry foyers, or storage rooms. After a set period without motion, the lights turn off to save battery power. Each light offers three colour temperature options, selectable via the included remote control (one remote may control both lights, or each light may have its own remote – check the package contents). The 6000mAh capacity supports relatively long runtimes even when used in constant-on mode, though motion-sensing mode will extend battery life significantly. The black finish reduces reflections and hides dirt marks in high-traffic areas. The 12W rating indicates the maximum electrical power drawn when LEDs are at full brightness; this provides a good balance of illuminance without excessive battery drain. The two lights can be placed in separate locations (e.g., top and bottom of stairs) to cover overlapping zones. Because they are cordless, you only need to mount the brackets and then attach the lights; no wiring through walls is required. The motion sensor typically has a detection angle of around 120 degrees and a range of 3 to 6 metres, depending on ambient temperature and movement speed. The remote control allows manual override, dimming, and colour changes. When the light is in motion-sensing mode, the remote can still adjust colour and brightness before the sensor times out. The lights are not designed for wet or outdoor use; install them in sheltered interior spaces. Recharging is via a USB cable (usually Type-C or micro-USB) for each unit; you can charge both simultaneously using two adaptors or sequentially. A full charge takes approximately four to six hours. The battery management system includes overcharge protection, but it is still advisable to disconnect the charger once the indicator shows full. The motion sensor may be affected by pets moving within range; reduce sensitivity if available, or mount higher. For optimal performance, avoid placing the sensor opposite a mirror or highly reflective surface, which may cause false triggering. To prolong battery health, avoid storing the lights in a completely discharged state for more than a month. The set includes all necessary mounting hardware and a user manual. These lights are suitable for residential or light commercial settings where automatic lighting is a convenience, not a security requirement.

Package Contents Highlights:

• Two motion sensor wall lights (black housing).
• Each light: 12W LED power, 6000mAh internal battery.
• Remote control for 3 colour temperature switching and dimming.
• USB charging cables for both units.

Important Usage Notes:
The motion sensor will not work through solid doors or thick glass. Keep the sensor lens clean. If the light stays on continuously without motion, check if the mode has been set to “constant on” instead of “motion”. The remote range may decrease when the battery in the light is low – recharge promptly. For any functional issues, refer to the troubleshooting section of the manual before contacting support.